COLD ROLLED :-
RSAL manufactures a wide range of low carbon ,mild steel CR products, in thickness ranging from 0.11 mm to 2.50 mm & up to a maximum width of 1020 mm, both in Coil & sheet form.
RSAL is also one of the few Indian manufactures of ultra thin 0.11,0.14 mm CR Coil extensively used for galvanizing.RSAL CR Coils & sheets are known for their close gauge tolerances, superior finish & perfect flatness, free of stretcher strains. They are offered in Bright and Matt finish, in annealed or full hard temper.Major grades manufactured are O,D,DD & EDD of non-ageing ,critical & super EDD CRCA, Automobile structural grades, TMBP, Galvanizing grades, Porcelain Enameling, Corrosion Resistance grade. |
|
Cold Rolled Full Hard Sheet
Coils/Sheets As per JIS G 3141
SPCC-18 or equivalent
Unannealed,Unoiled Suitable For
Galvanizing
Thickness |
0.11 mm to 0.700mm |
Width |
Up to 1020 mm |
Coil Id |
508 - 610 mm |
Coil Weight |
10 MT max. |
Material can be supplied |
Coil/Sheet form |
Special Tolerance on thickness can be provided
|
|
Cold Rolled Closed Annealed Coils/Sheets as per following Specifications |
Specification |
Grade/Quality |
JIS-G-3141-1996 ( Japanese) |
SPCC-SD/SB,SPCD-SD/SB
SPCE-SD/SB,SPCEN-SD/SB
CR-1,CR-2,CR-3 & CR-4 |
DIN 1623-Part 1 (German) |
St-12,St-13,St-14 |
BS 1449,Part 1 (British) |
CR-1,CR-2,CR-3 & CR-4 |
ASTM |
A 1008/M 1008-01a,A 366,A 619,A 620,A 629,A 606 & A 609 |
SAE |
1010,1008,1006 |
IS-513-1994/1997
(Indian) |
EDD,DD,D & O |
Dimensional Range |
Thickness: up to 2.50 mm
Width
:1250 mm max
Coil Id :508mm +-10 mm
Coil Wt :10 MT max
Packing :Sea Worthy
Export Packaging |
|
Other Special Grade of Steel Coil/Sheet as per following Specification |
Specification |
Grade/Quality |
ASTM
A 625 (TMBP Sheets) |
TMBP,S-R,T-2,T-3 |
DIN
1623 Part-3 (for Porcelain & enameling)) |
EK-2,EK-4 |
Dimensional
range |
Thickness:0:180
to 0.70 mm
Width |
: |
1250
mm max |
Coil Id |
: |
508 mm +- 10 mm |
Coil Wt |
: |
10 MT max. |
Packing |
: |
Seaworthy Export Packing |
|
EN
10165 (European) |
M390-50E,M450-50E,M560-50E,M450-65E,M520-65E,M630-65E |
EN
10126-1995 (European) |
M
660-50D,M890-50D,M1050-50D,M800-65D,M1000-65D
M1200-65D |
Dimensional
Range |
Thickness:
0.500 to 0.650 mm
Width |
: |
1250 mm max. |
Coil Id |
: |
508 mm+- 10 mm |
Coil WT |
: |
10 MT max |
Packing |
: |
Sea Worthy Export Packing |
|
|
|
|
|
|
|
|
